Multi-Brand PCP Pump - 310 Bars

Introduction

This PCP pump is guaranteed to hold pressure up to 310 bars, making it compatible with virtually all PCP air guns — unlike many pumps that, despite gauges marked up to 300 bars and beyond, barely reach 200 bars.

It will also suit nearly all PCP guns thanks to its widely used standard Quick Connect fitting.

The built-in pressure gauge is an oil-filled model, which helps dissipate heat from pressure buildup and prevents needle vibrations that can affect both instant readings and long-term reliability.

This gauge, confirming the true 310-bar capability, is graduated up to 400 bars. This does not mean the pump will reach such pressure, but rather that between 150 and 310 bars it operates within its maximum accuracy zone — a crucial factor at high pressures to avoid damaging equipment, particularly seals that are sensitive to overpressure, and this range matches the pressures found across the PCP market.

Description

This pump consists of 4 parts: the body, the dual handle (assembled with two screws using the included Allen key), a high-pressure flexible hose with its Quick Connect fitting, and the oil-filled gauge graduated up to 400 bars.

The two telescopic tubes are made of enameled steel with a large diameter to prevent any risk of buckling during the back-and-forth pumping strokes, while the base is solid black anodized aluminum.

The two foot pedals are made of painted, partially rubberized steel (anti-slip) and fold for easy transport and storage.

A welcome luxury: the Quick Connect inlet, compatible with most PCP pumps of all brands, features a removable cap to prevent any unwanted debris from affecting its operation — dirt, dust, mud, etc.

Note that the pump tube features an external sliding mechanism, offering the advantage of large-diameter tubes that reduce the risk of damage during the pushing effort.

This pump is equipped with a bleed valve located on the base, essential for releasing residual pressure.